EasyFlo 60-Polyurethane & silicone mold materials and casting plastics for making rubber molds to cast concrete, plaster, wax, resins & foam from Polytek Corp.

Home

Liquid Casting/Mold Shell Plastics & Foams

Polyurethane Liquid Casting Plastics

Pourable / Brushable Polyurethane Plastics

EasyFlo Series

EasyFlo 60

EasyFlo 60 is a super low viscosity, 1:1 by volume, polyurethane casting resin that has a 2 min. working time and a 15-30 min. demold. This is a super easy to use product that is infinitely versatile. Cures to a bright white color that can be dyed to any other color using Poly Color dyes. Great for all hobby, model making and general purpose resin casting applications.

Easy 1:1 mix, by volume
Super-low viscosity
Rapid cure
Very low shrinkage
Great general purpose casting plastic
High strength
Accepts fillers and colors easily

Watch a cold cast bronze being made using EasyFlo 60

Watch painting techniques for EasyFlo 60

Watch EasyFlo being cast with low-cost filler, PolyFil ND

View larger image

View as: List

Sort by: Default

PolyFil ND Filler 22lbs.

CODE: PolyFilND-22

$62.00

PolyFil ND is a "neutral density" filler designed for use with polyurethane liquid rubbers and plastics for several purposes. PolyFil ND can be used to reduce the cost of a resin or rubber casting without changing it's density. Adding PolyFil ND to polyurethane plastics such as EasyFlo and Poly 15-Series plastics can also dramatically reduce shrinkage in larger castings which are prone to gelling while hot and shrinking as they cool. PolyFil is a moisture-free filler which mixes into polyurethanes very readily and does not cause foaming. Experimentation with filler levels is required as fillers added to rubbers may increase hardness and reduce physical properties such as elongation and tesile strength. Adding too much PolyFil may increase viscosity greatly making air entrapment more likely.