Poly 1512X

Poly 1512X is a 1:1 mix, low viscosity, polyurethane liquid casting plastic that has a 5 minute working time and a ~0.5 hour demold depending upon the size/mass of the pour. Poly 1512X can be poured to produce decorative objects, production parts, prototype parts, tools, models, duplicate masters, patterns, and more. Also great for mother molds / mold shells using Poly Fiber II.

Poly 15-12X is a 1:1 mix, low viscosity, polyurethane liquid casting plastic that has a 5 minute working time and a ~0.5 hour demold depending upon the size/mass of the pour. Poly 1512X can be poured to produce decorative objects, production parts, prototype parts, tools, models, duplicate masters, patterns, and more. Also great for mother molds / mold shells using Poly Fiber II.

Poly 15-12X is a 1:1 mix, low viscosity, polyurethane liquid casting plastic that has a 5 minute working time and a ~0.5 hour demold depending upon the size/mass of the pour. Poly 1512X can be poured to produce decorative objects, production parts, prototype parts, tools, models, duplicate masters, patterns, and more. Also great for mother molds / mold shells using Poly Fiber II.

PolyFil ND is a "neutral density" filler designed for use with polyurethane liquid rubbers and plastics for several purposes. PolyFil ND can be used to reduce the cost of a resin or rubber casting without changing it's density. Adding PolyFil ND to polyurethane plastics such as EasyFlo and Poly 15-Series plastics can also dramatically reduce shrinkage in larger castings which are prone to gelling while hot and shrinking as they cool. PolyFil is a moisture-free filler which mixes into polyurethanes very readily and does not cause foaming. Experimentation with filler levels is required as fillers added to rubbers may increase hardness and reduce physical properties such as elongation and tesile strength. Adding too much PolyFil may increase viscosity greatly making air entrapment more likely.