BC-8010 Metal-Kast Urethane Resin

This product is no longer available. Please visit our sister brand, Alumilite's site and try their similar product Vac Master 50.

BC-8010 is a two-part, fast-setting urethane tooling and reproduction resin that simulates many of the desirable characteristics of aluminum metal. BC-8010 cures to a gray, Shore D83 plastic, is highly machinable and exhibits good heat transfer properties. It is an ideal resin for many applications, including construction of short run low temperature vacuum form tools, prototypes, models, display parts, fixturing and bulk back fill.


WARNING: This product can expose you to chemicals including Benzene, Cumene and Dibutyl Phthalate which are known to the State of California to cause cancer and/or reproductive harm. For more information, go to www.P65Warnings.ca.gov




Current Stock:

Technical Specifications

Mix Ratio by Weight:
Mix Ratio by Volume:
Shore Hardness:
Pot Life:
6-7 min.
Demold Time:
1.5-2 hr.
Cured Color:
Mixed Viscosity:
2,250 cP
Specific Gravity:
Specific Volume:
15.4 in³/lb
Heat Deflection Temp.:
Linear Shrinkage:
0.0007 in/in
Tensile Strength:
4,046 psi
Flexural Strength:
6,650 psi
Compressive Strength:
9,750 psi
Shake or Stir Part A & Part B before use. Demold time varies with thickness of casting. The thinner the casting, the longer the demold time. Shrinkage in polyurethane resins is caused by gelling while hot then cooling.

More Information

Material Calculator

Technical Bulletin

Safety Data Sheet - A

Safety Data Sheet - B

Kit Components
BC-8010 Components
5-lb kit includes: 2.5 lb of BC-8010 Metal-Kast Part A (~1 quart)
2.5 lb of BC-8010 Metal-Kast Part B (~1 quart)
20-lb kit includes: 10 lb of BC-8010 Metal-Kast Part A (~1 gallon)
10 lb of BC-8010 Metal-Kast Part B (~1 gallon)

Need assistance in selecting a product?

We’re here to help you along the way.