![How to Make a Brush-On Mold with Mold Shell [Part II]](https://cdn11.bigcommerce.com/s-w28cucznaf/images/stencil/385x215/uploaded_images/how-to-make-a-brush-on-mold-with-mold-shell-part-ii-.jpg?t=1639605653 "How to Make a Brush-On Mold with Mold Shell [Part II]")
How to Make a Brush-On Mold with Mold Shell [Part II]
Part I of this video tutorial demonstrates how to make a brush-on mold using tin-cured silicone rubber (TinSil® 80-30).In Part II, we comple...
Tutorials
![How to Make a Brush-On Mold with Mold Shell [Part I]](https://cdn11.bigcommerce.com/s-w28cucznaf/images/stencil/385x215/uploaded_images/how-to-make-a-brush-on-mold-with-mold-shell-part-i-.jpg?t=1639605653 "How to Make a Brush-On Mold with Mold Shell [Part I]")
How to Make a Brush-On Mold with Mold Shell [Part I]
Part I of this video tutorial demonstrates how to make a brush-on mold using tin-cured silicone rubber (TinSil® 80-30). In Part II, w...
Tek-Tip: Reduce Bubbles in Clear Casting Resin
Without the proper equipment, it can be difficult to achieve bubble-free castings with clear polyurethane casting resins such as Polyte...
Marbled Effect in Polyurethane Resin
An intrinsic “marbled” look can be a challenge to achieve with resin. It takes experimentation and it is extremely difficult t...
How to Make a Rubber “Glove” or “Sock” Mold
Glove molds, also referred to as sock molds, are one-piece rubber molds that can be turned back on themselves and peeled off. These mol...
How to Make a Rubber Mold of a Corbel
This mold making and casting tutorial features the making of a poured, polyurethane block mold of a plastic corbel. P...
Spray-On PlatSil® Gel-25 Mold with Mold Shell
PlatSil® Gel-25 is a platinum-cured silicone rubber that is used for theatrical prosthetics, lifecasting and mold making....
Mold Making Tutorial: Silicone Mold of Clay Sculpture
John Cannon of The Whimsical Gardens brought his clay sculpture to our facility to make a mold of the figure and then...
Mold Making: Poured Blanket Mold vs. Poured Block Mold
In this article, we will demonstrate two different mold making methods using the same plastic lion head model [pictured below]...
Tutorial: Brush-On Rubber Mold of Decorative Architectural Element
The following tutorial features the making of a one-piece, brush-on Polygel® 35 polyurethane rubber mold and a two-piece Poly...
Adding Fillers to Polyurethane Casting Resin
There are a few common reasons that fillers are added to polyurethane casting resins (e.g., EasyFlo Series Liquid Plastics,...
Customer Project: Decorated Venus Figurine – EasyFlo Liquid Plastic
At the Polytek March 2014 Mold Making & Casting Workshop, attendee Ro-Z Esposito (more info. on this artist at the end of the a...