PolyFoam R-5 Casting Foam
$141.00 - $533.00
PolyFoam R-2 Casting Foam
PolyFoam R-2 is a two-part, rigid polyurethane casting foam. This self-skinning foam has a free-rise density of 2 lb/ft³, but should be cast at a density of 4 to 8 lb/ft³ to achieve good surface detail and mold fill. Generally, PolyFoam products should be cast in TinSil® or PlatSil® silicone molds. Barrier coats (e.g., a fast-drying primer paint) can be applied to silicone molds before casting foam in order to produce pre-primed parts right out of the mold. These foams can also be poured into Poly 74 & 75-Series polyurethane rubber molds that have been coated with PolyCoat Sealer & Release Agent.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
$141.00
Technical Specifications
- Mix Ratio by Volume:
- 1A:1B
- Mix Ratio by Weight:
- 1A:1B
- Mixed Viscosity:
- 500 cP
- Cream Time:
- 30 sec.
- Rise Time:
- 3 min.
- Tack-Free Time:
- 10 min.
- Free-Rise Density:
- 2.5 lb/ft³
- Molded Density Range:
- 4-8 lb/ft³
- Demold Time:
- 30 min.
More Information
| PolyFoam R-2 | Components |
|---|---|
| 4-lb kit includes: | 2 lb of PolyFoam R-2 Part A (~1 quart) 2 lb of PolyFoam R-2 Part B (~1 quart) |
| 16-lb kit includes: | 8 lb of PolyFoam R-2 Part A (~1 gallon) 8 lb of PolyFoam R-2 Part B (~1 gallon) |
| 80-lb kit includes: | 40 lb of PolyFoam R-2 Part A (~5 gallons) 40 lb of PolyFoam R-2 Part B (~5 gallons) |
