PolyPoxy® 6126 Surface Coat Epoxy
PolyPoxy® 6126 is a gray, aluminum-filled, room temperature curing (RTV) surface coat epoxy that can be used for high-heat tooling applications up to ~300°F. For continuous service temperatures between 150°F and 300°F, a post cure is required. Common applications include: vacuum form tools, RTM and RIM molds, and compression and injection molds.
PolyPoxy® 6126 a has a pot life of 45 minutes, a demold time of 16 hours, and cures to a Shore D90 hardness (post-cure property).
WARNING: This product contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
$253.00
Technical Specifications
- Mix Ratio by Weight:
- 100A:10B
- Mix Ratio by Volume:
- 100A:15B
- Shore Hardness:
- D90 (post-cure)
- Maximum Application Thickness:
- 1/16"
- Pot Life:
- 45 min.
- Demold Time:
- 16 hr.
- Cured Color:
- Gray
- Mixed Viscosity:
- Thixotropic
- Specific Gravity:
- 1.47
- Specific Volume:
- 18.9 in³/lb
- Tensile Strength:
- 5,800 psi (post-cure required)
- Flexural Strength:
- 6,500 psi (post-cure required)
- Compressive Strength:
- 28,000 psi (post-cure required)
- Heat Deflection Temp.:
- 291°F (post-cure required)
- Notes:
- Stir Resin thoroughly before use. BEFORE USE: Thoroughly read Safety Data Sheets, Technical Bulletin, and product labels. WARNING: THE EPOXY CURE REACTION IS VERY EXOTHERMIC. Do not apply in thicknesses greater than recommended.
More Information
| PolyPoxy® 6126 | Components |
|---|---|
| 2.66-lb kit includes: | 2.4 lb of PolyPoxy® 6126 Resin (~1 quart) 0.26 lb of PolyPoxy® 6126 Hardener (~0.5 pint) |
| 12.2-lb kit includes: | 11 lb of PolyPoxy® 6126 Resin (~1 gallon) 1.2 lb of PolyPoxy® 6126 Hardener (~1 quart) |
| 61-lb kit includes: | 55 lb of PolyPoxy® 6126 Resin (~5 gallons) 6 lb of PolyPoxy® 6126 Hardener (~1 gallon) |