TinSil® 70-25 Silicone Rubber
$606.00
TinSil® Brush/Spray 25 Silicone Rubber
TinSil® Brush/Spray 25 is a brushable or sprayble, tin-catalyzed system that cures to a translucent, Shore A25 rubber. When Part A & Part B are mixed together, the rubber self-thickens to a creamy consistency ideal for making thin, blanket molds on vertical and overhead surfaces. Brush on by hand or spray with a low-cost PlasPak Spray Gun. For larger blanket molds, consider higher-volume 1:10 ratio spray equipment.
View all TinSil® Silicone Mold Rubbers.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
$606.00
Technical Specifications
- Mix Ratio by Weight:
- 1A:10B
- Shore Hardness:
- A25
- Pot Life (1-lb Mix):
- 30.00 min.
- Pot Life range:
- 30 min.
- Demold Time:
- 16.00 hr.
- Demold Time range:
- 16 hr.
- Cure Color:
- Translucent
- Specific Volume (in3/lb):
- 25.3
- Specific Gravity:
- 1.1
- Linear Shrinkage (in/in):
- 0.3
- Elongation (%):
- 608
- Tensile Strength (psi):
- 278
- Die B Tear Strength (pli):
- 75
- Die T Tear Strength (pli):
- 27
More Information
| Unit Sizes |
|---|
| 4 lb of TinSil® Brush/Spray 25 Part A (~2 quarts) |
| 40 lb of TinSil® Brush/Spray 25 Part B (~5 gallons) |
