PlatSil® Gel-25

SKU:
GEL25U16

PlatSil® Gel-25 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore A25 rubber. This silicone is most often used to make prosthetic appliances (in conjunction with PlatSil® Deadener LV or Smith's Theatrical Prosthetic Deadener), for lifecasting and mold making.

PlatSil® Gel-25 has been tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations) for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY. 

$298.00
Current Stock:

Find a Distributor Adding to cart… The item has been added

Technical Specifications

Mix Ratio by Volume:
1A:1B
Mix Ratio by Weight:
1A:1B
Shore Hardness:
A25
Pour Time:
5 min.
Demold Time:
1 hr.
Cured Color:
Milky White
Mixed Viscosity:
3,500 cP
Specific Volume:
25 in³/lb
Specific Gravity:
1.1
Elongation:
385 %
Tensile Strength:
434 psi
Die B Tear Strength:
146 pli
Die T Tear Strength:
28 pli
Cure Inhibition:
Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.

More Information

Material Calculator

Technical Bulletin

Safety Data Sheet

Kit Components
PlatSil® Gel-25 Components
2-lb kit includes: 1 lb of PlatSil® Gel-25 Part A (~1 pint)
1 lb of PlatSil® Gel-25 Part B (~1 pint)
16-lb kit includes: 8 lb of PlatSil® Gel-25 Part A (~1 gallon)
8 lb of PlatSil® Gel-25 Part B (~1 gallon)
80-lb kit includes: 40 lb of PlatSil® Gel-25 Part A (~5 gallons)
40 lb of PlatSil® Gel-25 Part B (~5 gallons)