PolyPoxy® 6060 Surface Coat Epoxy
PolyPoxy® 6060 a blue, room temperature curing (RTV) surface coat epoxy designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.
PolyPoxy® 6060 a has a pot life of 30 to 35 minutes, a demold time of 12 to 16 hours, and cures to a Shore D89 hardness.
WARNING: This product contains Bisphenol A (CAS 25068-38-6), a chemical known to the State of California to cause birth defects or other reproductive harm, and contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
Technical Specifications
- Mix Ratio by Weight:
- 100A:9B
- Mix Ratio by Volume:
- 100A:15B
- Shore Hardness:
- D89
- Maximum Application Thickness:
- 3/8"
- Pot Life:
- 30-35 min.
- Demold Time:
- 12-16 hr.
- Cured Color:
- Blue
- Mixed Viscosity:
- 25,000 cP
- Specific Gravity:
- 1.76
- Specific Volume:
- 15.8 in³/lb
- Tensile Strength:
- 7,200 psi
- Flexural Strength:
- 8,900 psi
- Compressive Strength:
- 16,400 psi
- Heat Deflection Temp.:
- 158°F
- Notes:
- Stir Resin thoroughly before use. BEFORE USE: Thoroughly read Safety Data Sheets, Technical Bulletin, and product labels. WARNING: THE EPOXY CURE REACTION IS VERY EXOTHERMIC. Do not apply in thicknesses greater than the recommended maximum thickness.
More Information
PolyPoxy® 6060 | Components |
---|---|
3.08-lb kit includes: | 2.8 lb of PolyPoxy® 6060 Resin (~1 quart) 0.28 lb of PolyPoxy® 6060 Hardener (~0.5 pint) |
65.5-lb kit includes: | 60 lb of PolyPoxy® 6060 Resin (~5 gallons) 5.5 lb of PolyPoxy® 6060 Hardener (~1 gallon) |