![How to Make a Concrete Texture Mat [Slate Model]](https://cdn11.bigcommerce.com/s-w28cucznaf/images/stencil/385x215/uploaded_images/how-to-make-a-concrete-texture-mat-slate-model-.jpg?t=1639605654 "How to Make a Concrete Texture Mat [Slate Model]")
How to Make a Concrete Texture Mat [Slate Model]
In this video, we show you how to create a rubber texture mat from real slate. Texture mats are commonly used as concrete texturing tools...
Tutorials
![How to Make a Brush-On Mold with Mold Shell [Part II]](https://cdn11.bigcommerce.com/s-w28cucznaf/images/stencil/385x215/uploaded_images/how-to-make-a-brush-on-mold-with-mold-shell-part-ii-.jpg?t=1639605653 "How to Make a Brush-On Mold with Mold Shell [Part II]")
How to Make a Brush-On Mold with Mold Shell [Part II]
Part I of this video tutorial demonstrates how to make a brush-on mold using tin-cured silicone rubber (TinSil® 80-30).In Part II, we comple...
Tek-Tip: Reduce Bubbles in Clear Casting Resin
Without the proper equipment, it can be difficult to achieve bubble-free castings with clear polyurethane casting resins such as Polyte...
Marbled Effect in Polyurethane Resin
An intrinsic “marbled” look can be a challenge to achieve with resin. It takes experimentation and it is extremely difficult t...
How to Make a Rubber “Glove” or “Sock” Mold
Glove molds, also referred to as sock molds, are one-piece rubber molds that can be turned back on themselves and peeled off. These...
How to Make a Rubber Mold of a Corbel
This mold making and casting tutorial features the making of a poured, polyurethane block mold of a plastic corbel. P...
Backfilling PlatSil® Gel-OO Skin with Flexible Foam
If you’re using silicone to create props, it may make more sense to create a silicone skin backfilled with foam instead of a solid...
Mold Making Tutorial: Silicone Mold of Clay Sculpture
John Cannon of The Whimsical Gardens brought his clay sculpture to our facility to make a mold of the figure and then...
Mold Making Tutorial: Old-Growth Cypress Concrete TableTop
We recently visited SureCrete Design Products, a decorative and specialty concrete manufacturer, at their headquarters in Dade Cit...
Mold Making: Poured Blanket Mold vs. Poured Block Mold
In this article, we will demonstrate two different mold making methods using the same plastic lion head model [pictured below]...
Tutorial: Silicone Blanket Mold with Foam Mold Shell
This tutorial features the making of a poured blanket mold (for general information on blanket molds, visit this “blanket mold: basics”...
Tutorial: How to Make a Silicone Rubber Candle Mold
The following tutorial details the process of making a silicone rubber mold for casting wax to make candles. Supplies Needed...